Factory Supply Weld Neck Flange Ansi 150 Rf - Single Pin Heavy Duty Clamp – Triround
Factory Supply Weld Neck Flange Ansi 150 Rf - Single Pin Heavy Duty Clamp – Triround Detail:
Securely connect tri-clamp ends with heavy duty, stainless steel single pin clamp
The single pin heavy duty clamp with a wingnut is made from 304 stainless steel alloy. It is used to join two separate tri-clamp ends to one another. Sizes on this product range from 1/2 inch all the way up to 12 inches in diameter. A tri-clamp rubber gasket should be placed between the two flange ends to ensure proper fit and secure connection. Do not over tighten wing-nut as this may damage product.
This product should not come in contact with processing media and thus is not offered in 316L alloy option. Clamp connections create a non-permanent join for easy access to clean and inspect line processes.
SINGLE HEAVY DUTY CLAMPS W/ WING NUT PART NUMBERS & DIMENSIONS
Size |
Service Pressure Rating at 70°F |
Service Pressure Rating at 250°F |
Dimension (A) |
1/2″ – 3/4″ |
1,500 |
1,200 |
1.062 |
1″ – 1 1/2″ |
500 |
300 |
2.122 |
2″ |
450 |
250 |
2.654 |
2-1/2″ |
400 |
200 |
3.185 |
3″ |
350 |
175 |
3.717 |
4″ |
300 |
150 |
4.820 |
6″ |
150 |
75 |
6.695 |
8″ |
100 |
50 |
8.695 |
10″ |
75 |
40 |
10.695 |
12″ |
50 |
25 |
12.695 |
TRI-CLAMP FITTINGS AND GASKET SIZING GUIDE
Sanitary Size |
OD of Flange End |
ID of Tube |
OD of Tube |
1/2″ |
0.992 |
0.370 |
0.500 |
3/4″ |
0.992 |
0.620 |
0.750 |
1″ |
1.984 |
0.870 |
1.000 |
1 1/2″ |
1.984 |
1.370 |
1.500 |
2″ |
2.516 |
1.870 |
2.000 |
2 1/2″ |
3.047 |
2.370 |
2.500 |
3″ |
3.579 |
2.870 |
3.000 |
4″ |
4.682 |
3.834 |
4.000 |
6″ |
6.562 |
5.782 |
6.000 |
8″ |
8.602 |
7.782 |
8.000 |
10″ |
10.570 |
9.782 |
10.000 |
12″ |
12.570 |
11.760 |
12.000 |
Product detail pictures:
Related Product Guide:
Global Ceiling Mounted Lifts Market Outlook 2019-2026: Aacurat gmbh, ArjoHuntleigh, Dogpools, Ergolet, Etac, Gainsborough Baths | 200mm Flange And Fittings
Fumoto Engine Oil Drain Valve to be Featured at 2019 SEMA Show in Las Vegas | Business & Finance | Ball Valve
As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for Factory Supply Weld Neck Flange Ansi 150 Rf - Single Pin Heavy Duty Clamp – Triround, The product will supply to all over the world, such as: Palestine , Honduras , European , Nowadays our products sell all over the domestic and abroad thanks for the regular and new customers support. We provide high quality product and competitive price, welcome the regular and new customers cooperate with us!
By Alexandra from Brisbane - 2016.05.02 18:28
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Doreen from Hanover - 2015.12.14 15:26